極小 小判形軌道 #1 改
Minimum Oval Truck #1 Improvement
a050
制作年:2014 – 2016〜2026
Mixed media
- 2016年完成の「極小 小判形軌道 #1 |Minimum Oval Truck #1」に、増築工事と台座の改修工事 他を行いリニューアル



オリジナル
2016



増築工事後 2026

オリジナル
2016

増築工事後 2026


スワイプで回転
Swipe to rotate






























超小型の楕円レールを使った、2016年完成の「極小 小判形軌道 #1 |Minimum Oval Truck #1」に、増築工事と台座の改修工事 他を行いリニューアルしました。(縮尺=1:150、Nスケール、レール9mm)
2016年オリジナル完成時の「工場らしき造形だが、何の工場なのか、時代設定はいつなのかなど、詳細は全てあいまい」というコンセプトはそのままに、次の改修おこないました。 造形的な面白さが増すように改修を行っています。
- 建屋・煙突の追加とLEDの追加
- 台座の改修(外側に50mm幅のアガチス単板追加 と 新規塗装)
- プラグ類の更新(ACアダプター用プラグとレール給電用プラグの交換)
- 台座裏面の配線の更新(新しいコードに交換)
- 台座裏面にゴム足追加(4つ)
- 照明用ボリュームの撤去(ボリューム自体が電気抵抗なのでLEDが暗くなる原因となっていたため、今回撤去)
もともと造形的な遊びが目的で制作したので、構造的にはあり得ない非現実的な立体構成になっており、完全にファンタジーの世界なのはそのままです。 2011〜2012年頃より「仮想建築シリーズ」の原型と言えるのかどうか、わけのわからないものを作り始めていましたが、これは初めて作品として完成したものでした。
H 340 × W 210mm × D 160mm mm程度・アクリルケース込み H 420mm
(台座の改修により、本体の高さがオリジナルより20mmほど増加)
The original concept from 2016 remains unchanged: “An industrial-looking structure, but the type of factory, its period, and other details are all left ambiguous.”
The modifications were made to enhance the visual interest of the structure.
- Addition of buildings, a chimney, and LEDs
- Modification of the base (addition of a 50 mm (1.97 in) wide agathis wood strip around the perimeter and new paint)
- Replacement of plugs (AC adapter plug and track power plug)
- Replacement of wiring on the underside of the base (new cables)
- Addition of rubber feet to the underside of the base (4 feet)
- Removal of the lighting control volume knob (the potentiometer itself acted as an electrical resistance, causing the LEDs to become dim. It was removed during this renovation.)
The original purpose of this work was to explore visual forms. Its structurally impossible and unrealistic three-dimensional composition remains unchanged, as does its entirely fantastical nature.
Around 2011–2012, I began making inexplicable objects that may or may not be considered the prototypes of the Imaginary Architecture Series. This was the first one to be completed as a finished work.
H 340 × W 210 mm (8.27 in) × D 160 mm (6.30 in)
H 420 mm (16.54 in), including the acrylic case
(The modifications to the base increased the overall height of the work by approximately 20 mm (0.79 in) compared with the original.)
- 販売の際の付属品:
- アクリルケース(3mm厚・透明・押出し)付属
- 照明用のACアダプター(5V・2.0A)付属
※5VのACアダプター限定です。5V 以上のものを使用した場合は、最悪の場合LEDが一瞬で壊れます。 - パワーパック用 DCフィーダーコード N用 付属(TOMIX 5534 DCフィーダーNのレール側プラグ部分を別のプラグに交換したもの)
- パワーパック本体は付属しません。(パワーパックは TOMIX 推奨)
- 車両は付属しません。(Nゲージ・9mm)
- Youtubeの走行動画に写っているような小型の車両しか走行できません。(津川洋行・銚子電気鉄道 デキ3 電気機関車 N)
また、時計回りの走行は問題ありませんが、逆の反時計回りの走行はなぜか脱線が多いようです。
- Accessories Included with the Artwork for Sale
- Acrylic Case (3 mm thick, clear extruded acrylic) included
- AC Adapter for lighting (5V, 2.0A) included
- Use only a 5V AC adapter. Using an adapter with an output voltage higher than 5V may cause the LEDs to fail instantly.
- DC Feeder Cable for N Gauge included (modified by replacing the rail-side plug of the TOMIX 5534 DC Feeder N with a different plug)
- Power Pack is not included. (TOMIX power packs are recommended.)
- Rolling stock is not included.(N Scale・9mm)
- Only small rolling stock, such as the locomotive shown in the YouTube running video, can operate on this layout. (Tsugawa Yoko, Choshi Electric Railway DeKi 3 Electric Locomotive, N Scale)
Running in the clockwise direction is problem-free. However, for some reason, derailments tend to occur frequently when running in the opposite, counterclockwise direction.



オリジナルの立体作品と、それをもとにAIを用いて制作した2種類のポスター表現。
1:オリジナル作品画像
2:アール・デコ
3:ロシア構成主義(ロシアン・アバンギャルド)
One Architectural Work, Three Visual Interpretations.
The original three-dimensional artwork, followed by two poster interpretations created with AI.
1: Original Artwork
2: Art Deco
3: Russian Constructivism
Original architectural artwork by Hiroshi Yamao.
Poster interpretations created with AI.

a050 極小 小判形軌道 #1 改
Minimum Oval Truck #1 Improvement 2016・2026
Production and photography by Yamao Hiroshi, 2026
(OLYMPUS OM-D E-M5 Mark II + M.ZUIKO 12-40mm F2.8 Pro)
2026年(令和8年)11月2日発表
Announced on November 2, 2026






















作品の360°エンドレス自動回転— GIF スライドショー6組
(別ページで開きますが、容量が大きいため表示に時間がかかります。)
Artwork Auto-Loop in 360° — 6 GIF Slideshows
(Opens in a separate page. Due to the large file size, loading may take some time.)